Stall and Door Project


Woodville, VA


Stall fronts and grilles with Heavy duty doors and large V yoke. 2″ on center bars in lower panel of the stall doors.  Trim strips in the stall doors are Douglas Fir and the bars are 1″ round.  Standard 9×11 grain scoop hole in the corners of the stall front grilles w/ a pin latch for the doors.  Powder coating on the stalls in “concrete”

The exterior doors use a wide bar profile in the upper panel for a modern look w/ Douglas Fir panels in the lower part of the doors.

The gates at the doors are windows are on tracks and split at the center for easy emergency access to the outside.

The floor drains were made using a water jet to custom cut the pattern into aluminum and matching powder coating